Default IP: 192.168.1.1
Default username : admin
Default password : admin
Setting Bridge
1. Click Advanced Setup
2. Click WAN
3. Find VPI/VCI: 8/81, Click Edit
4. ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
5. Connection Type Bridging, Encapsulation Mode LLC/SNAP-BRIDGING, Next
6. Cheklist Enable Bridge Service, Service Name: Speedy, Next
7. WAN Setup - Summary, Save
8. Save/Reboot
Setting PPPoE
Code:
1. Click Advanced Setup 2. Click WAN 3. Cari VPI/VCI: 8/81, Click Edit 4. ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next 5. Connection Type PPP over Ethernet (PPPoE), Encapsulation Mode LLC/SNAP-BRIDGING, Next 6. Put your PPP Username: (Nomorspeedy@telkom.net); PPP Password: (Password from provider); PPPoE Service Name: Speedy, Next 7. Centang Enable WAN Service, Service Name: Speedy, Next 8. WAN Setup - Summary, Save 9. Save/Reboot
